1. General Introduction of CNBM Geotextile:
Geotextiles are permeable fabrics which, when used in association with soil, have the ability to separate, filter, reinforce, protect, drain or seal. Typically made from polyester (PET) or polypropylene (PP), geotextile fabrics come in two basic forms: woven & nonwoven (Needle-punched or Thermal-bonded).
Geotextile is usually used for filtration, isolation, reinforcement or preservation, with the characteristics of high tensile strength, good penetrability, freezing durability, aging & corrosion resistance, etc.
The nonwoven geotextile can be made of long fiber or short fiber with different mechanical properties. With inter-fiber space, it has very good adhesive power. The soft surface gives it high tearing strength, deformability as well as flat drainage ability. The soft and interspaced surface guarantees good friction coefficient, which enables it to absorb small soil grains. This can prevent the soil from being washed away, meanwhile it realizes water discharging. Moreover, the soft surface gives protection to the facilities below.
2. Characteristics of CNBM Geotextile:
1) High tensile strength; Produced with PET or PP fiber, CNBM geotextile can maintain good tensile strength and elongation in both dry and wet environment.
2) Made of chemical fiber, CNBM geotextile has good burying, hydrolyzation, microbial & corrosion resistibility, as well as wet mechanical property. Besides, it has the ability to resist high & low temperature, ultraviolet and chemicals (chemical stability);
3) CNBN geotextile is permeable material, so it has inverse filtering & isolation ability; While the fluffy texture gives it very good drainage ability;
4) It has good anti-punctuation ability, which gives under-layers good protection;
5) With good friction coefficient & tensile strength, geotextile has good earth work reinforcement ability.
6) Soft & light, easy for transportation & application.
3. Application of CNBM Geotextile:
1) Hydraulic Engineering: Inverse filtering & protection in reservoir dam, earth rock cofferdam, tunnel, gutter way, etc; Protection for impervious layer in artificial lake, river-way, reservoir, etc;
2) Road Works: Drainage work in retaining wall, road side slope, roadbed, under-layer of railway & airfield runway, interlayer for roadbed & pavement in highway & asphalt road (for drainage, isolation & reinforcement);
3) Harbor Engineering: Isolation of soft soil and rock block in cofferdam, dock and sea back;
4) Landfill Site Projects: Isolation & protection of impervious layer and basement, isolation of filter material & waste in land fill site;
5) Landscape Engineering: Isolation between green plant layer & base in landscape planting projects;
6) Other Usage: Drainage & reinforcement for ground work (increase its bearing capacity); Isolation & impervious layer for power plant, mill tailings, etc.
4. Technical Data for CNBM Polyeter Long Fiber Nonwoven Geotextile:
| Density |
Thickness |
Breaking Strength |
Elongation of Fracture |
CBR Bursting Strength |
Vertical Penetration Parameter |
Equivalent Aperture |
| g/m2 |
mm |
KN/m |
% |
KN |
cm/s |
O95 mm |
| 65 |
1.2 |
2.8 |
40 ~ 80 |
0.7 |
K x (10-1 ~ 10-3)
(K = 1.0 ~ 9.9) |
0.07 ~ 0.2 |
| 75 |
1.4 |
3.3 |
0.8 |
| 100 |
1.6 |
5.0 |
0.95 |
| 150 |
1.52 |
7.5 |
1.5 |
| 160 |
2.0 |
8.5 |
1.60 |
| 200 |
2.4 |
11 |
2.10 |
| 250 |
2.8 |
14 |
2.60 |
| 300 |
3.4 |
16 |
3.20 |
| 400 |
4.0 |
21 |
4.0 |
| 500 |
4.5 |
25 |
4.8 |
5. Introduction of CNBM
China National Building Material Group Co., Ltd (CNBM Group) is the largest state-owned comprehensive building materials industry group company in China. It was founded in 1984 upon the approval of China State Council, with products as various kinds of building materials, decoration materials, furniture, equipments, etc. It has been ranked as one of the World Top 500 Enterprises for 6 successive years and No. 2 in world building materials industry.
Up until the end of 2016, CNBM owns total assets of over 550 billion RMB, with employees of over 250,000, annual turnover of 300 billion RMB. Among all CNBM subordinate companies, 15 of them are listed. CNBM owns 26 national research institutes, with 38000 scientists, 33 national industry inspection center, over 8000 patents, 11 national research & technical center, and 18 standard draft committee.
6. Our Services
CNBM International has over 20 oversea warehouses & offices in UAE, KSA, Germany, Indonesia, India, Brazil, etc. We provide professional localized services for our customers. In UAE, we have an self-built warehouse which takes over 50,000.00 SQM for stock service.
Audited Supplier 
){kind=link}
){kind=link}